y图网

阳光花园住宅小区电气设计【设计说明书42页+CAD图纸26张】

本站优惠价
45.00
8.2折 原价:¥55.00
  • 库存
  • 销量
  • 1000000
  • 0
  • 服务
  • 由"毕业季"发货,并提供售后服务。
担保交易,完全保证,有问题可咨询客服协商处理,商品虚假、链接失效可申请补发或者退款
  • 分享

毕业季

  • 信誉:
  • 掌柜:
  • zyh
  • 宝贝:
  • 119184件
  • 认证:
  • 个人
  • 创店:
  • 2018-07-27
  • 描述
    4.99
  • 发货
    5.00
  • 售后
    4.99


摘要

Abstract

1 工程概况

1.1 住宅小区概况

1.2 电气设计要求

1.3 电气设计内容

1.4 电气设计成果

2 住宅小区负荷计算

2.1 小区负荷分析

2.2 负荷计算

2.3 无功计算及补偿

2.3.1 补偿电容的接线方式

2.3.2 无功补偿的方式

2.3.3 电容器补偿容量

2.3.4 电容器选型

3  短路电流计算

3.1 短路电流计算的目的和内容

3.2 短路电流计算原则

3.3 短路电流计算的步骤

4 变电所方案

4.1 变电所设置简述

4.2 变电所选址与设置

4.3 变电所位置选择

4.4变电所型式方案选择

5 主变压器的选择

5.1 变压器数量的选择

5.2 变压器容量的确定

6 变电所主接线方案

6.1 变电所主接线型式

6.2 变电所主接线布置

7  电气设备的选择

7.1 简述

7.2 高压设备的选择

7.3 低压备的选择

7.3.1低压断路器的选择与校验

7.3.2配电柜低压断路器的选择与校验

7.3.3低压电流互感器的选择与校验

7.3.4刀开关的选择与校验

7.3.5低压配电柜型号选择

8 变电所导线选择

8.1 高压侧线路的选择与校验

8.1.1高压电缆的选择与校验

8.1.2高压母线的选择与校验

8.2低压侧线路的选择与校验

8.2.1低压电缆的选择与校验

8.2.2低压母线的选择与校验

9 变电所继电保护设计原理

9.1 变电所继电保护种类

9.2 变压器的继电保护

9.3 高压出线保护

9.4 高压母线保护

10 防雷与接地

10.1 简述

10.2 变电所防雷措施

10.3变电所接地措施

10.4接地开关的选择

参考文献

致谢

附录


 

CONTENTS

Introduction

Abstract

Preface

1 Engineering Survey

1.1 Residential area survey

1.2 Electrical design

1.3 Electrical design content

1.4 Electrical design results

2 Residential district load calculation

2.1 Residential load analysis

2.2 Carry the residenttial load reckoning

2.3 Residential load analysis

2.3.1 Reactive power calculation and compensation

2.3.2 Reactive power compensation way

2.3.3 Reactive power compensation capacity

2.3.4 Capacitor selection

3 Calculation of short-circuit current

3.1 The significance and content of the short-circuit current calculation

3.2 Calculation method of short-circuit current

3.3 Selection of short-circuit calculation points

4 Substation scheme

4.1 Sets of power substation

4.2 Substation layout and structure scheme

4.3 Substation location choice

4.4 Substation type scheme selection

5 Determine the number and capacity of main transformer

5.1 Choice of transformer number

5.2 Transformer capacity and number

6 Substation main wiring scheme

6.1 Substation main wiring scheme

6.2 Substation main connection type

7  Choice of transformer primary equipment

7.1 Sum

7.2 The choice of high-voltage equipment

7.3 Selection of low pressure primary equipment

7.3.1 Selection and verification of low voltage circuit breaker

7.3.2 Selection and verification of low voltage switchgear

7.3.3 Selection and verification of current transformer

7.3.4 Selection and verification of knife switch 20

7.3.5 Selection and verification of low voltage primary equipment

8 The choice of substation high and low voltage line

8.1 High voltage side line selection and verification

8.1.1 High voltage side line selection and verification

8.1.2 Selection and verification of high-voltage cable

8.2 High voltage bus selection and verification

8.2.1 Selection and verification of low voltage side line

8.2.2 Selection and verification of low-voltage cable

9 Substation relay protection design principle

9.1 Relay protection type

9.2 Substation relay protection type

9.3 Substation 10kV feeder protection

9.4 Substation 10kV bus protection 30 

10 Lightning protection and grounding

10.1 Sum

10.2 Protection of lightning over-voltage

10.3 Substation grounding measures

10.4 Selection of earthing switch

Reference

Acknowledgement

Appendix



阳光花园住宅小区电气设计

 

 

XX农业大学  机械与电子工程学院 XX

摘要: 本次所设计的课题是阳光花园住宅小区供电系统18号住宅楼供配电的初步设计该供电系统是由独立的变配电所组成的住宅小区专用的降压变电系统具有10kV和380V两个电压等级,10kV一侧接与供电局提供的10kV电源380V主要用于小区用户的用电。本设计是以我国现行的各有关规范规程等技术标准为依据,根据任务书提供原始资料,参照有关资料及书籍,对各种方案进行比较而得出最为合适的方案,同时考虑到供电系统的安全性、可靠性及经济性。本计算书通过对主接线设计,短路电流计算,主要电气设备型号和参数的确定,电气设备的动热稳定校验,无功补偿设计,防雷和过电压保护装置的设计等较为详细地完成了本变电所的设计18号住宅楼电气设计主要包括照明配电,弱电设计,防雷与接地等内容。

关键词:负荷计算 继电保护 短路计算 防雷接地

 

 

Electrical Design Of Residential District In South Campus Of Garden

(Mechanical & Electrical Engineering College of Shandong Agricultural University, Tai’an, Shandong 271018)

Abstract  The subject of this design is the preliminary design of the 10kV power supply system and 18# residential building distribution system for the South Campus of Shandong Agricultural University.. The power supply system is composed of independent variable distribution of residential special step-down variable electric system, with 10kV and 380V two voltage levels, 10kV side connected with power supply bureau provides the 10kV power supply, 380V is mainly used for residential users of electricity. Design based on China's current relevant standards technical standards as the basis, according to the task book provide original data, with reference to the relevant information and books, comparison that the most suitable solution to various kinds of schemes, and taking into account the power system security, reliability and economy. The specification through to the transformer substation main wiring design, short-circuit current calculation, determination of main electrical equipment models and parameters, the electrical equipment of the dynamic thermal stability check, no power compensation design, lightning protection and over voltage protection device design is detailed completed the design of the variable. The electrical design of the single building is based on the relevant regulations of the state to complete a multi-storey residential building electrical construction design, including lighting distribution, lightning and grounding, weak design and other content.

 

Keywordsload calculation, relay protection, short-circuit calculation, lightning protection and grounding

 


前言

随着经济的发展和人民生活水平的提高,对供电质量的要求日益提高。国家在城乡电网建设和改造中,要求高压直接进入负荷中心,形成高压受电—变压器降压—低压配电的供电格局,所以供配电要向节地、节电、紧凑性、小型化、无人值守的方向发展。住宅小区内设置变电所成为主流。

其次随着社会发展和城市化的进程加快,负荷密度越来越高,城市用地越来越紧张,城市配电网逐步由架空线向电缆过渡,架杆方式安装的配电变压器越来越不适应人们的要求。各种变电所应运而生,变电所是电力系统中对电能的电压和电流进行变换、集中和分配的场所,是电力系统中电能传输必不可少的环节,起着桥梁的作用。变电所是电力配送的重要环节,也是电网建设的关键环节。变电所设计质量的好坏,直接关系到电力系统的安全、稳定、灵活和经济运行。为满足负荷日益增长的需要,提高对用户供电的可靠性和电能质量,就需要做到变电所整体的稳定、可靠并采取相应的措施提高供电可靠性和提高电能质量

1 工程概况

1.1 住宅小区概况

阳光花园住宅小区包括住宅楼25住户共720户。本次设计不包括小区公共用电。本住宅小区均为三级负荷,额定电压为380/220V

1.2 电气设计要求

根据小区的供电电源及小区内用电负荷情况,并适当兼顾小区以后的发展,应采用安全可靠,技术先进,经济合理的供配电设计方案。变配电所的位置和变电所型式的选择;根据负荷计算、功率因数计算及无功功率因数补偿等来确定变电所主变压器的台数与容量;短路电流的计算;变电所主接线方案的选择,高低压侧一次回路设备的选择与校验,各单体楼线路及设备的选择与布置,继电保护装置设备和保护方式的选择与校验确定防雷和接地装置的布置和选择。

1.3电气设计内容

电气设计内容包括:负荷计算,功率因数计算无功功率计算和补偿,变配电所的选址和室内布置的选择,短路电流计算,变压器选择,主接线选择,高低压电气设备选型与安装,高低压线路的计算电流及导线型号的选择,电气照明设计,变电所的继电保护,住宅楼供配电和弱电系统设计,防雷接地。

1.4电气设计成果

电气设计计算书一份,电气施工图26张。

…………

…………

字数统计.png

图纸汇总.png



  • 商品评价
  • 交易规则